Want to refresh a basic bathroom? Keep reading to learn how to remove glass shower doors and say goodbye to that impossible-to-clean door frame.
Welcome friends! Today I’m excited to share a simple DIY to upgrade a basic bathroom. This project was inspired by my friend Lindsay over at Woods and Ivory who shared her shower makeover on Instagram–thank you Lindsay! Our primary bath came with builder grade sliding doors and the frame was impossible to keep clean. I disliked the look, and honestly felt like I could not get past those yucky doors when it came to styling the space. I finally decided to go for it! Last weekend I completed this project by myself in just a few hours. Even if you do not consider yourself a DIY-er, you can do this! Keep reading to learn how to remove glass shower doors and upgrade your bathroom, on a budget.
This post contains affiliate links. If you click a link and make a purchase, I may receive a small commission at no additional cost to you. This helps support my blog and allows me to continue creating! For my policies, click HERE.
Here are the glass doors in all their glory! You can see that there is a lip at the bottom of the shower insert that will keep the water in, even without the doors. So let’s say goodbye and give this space a fresh look!
How to Remove Glass Shower Doors (and Frame)
Step 1: Lift Off the Doors
Lift each door off of the track and carefully remove it from the shower. I was able to do this on my own, but they are a bit heavy, so consider having a helper for this step.
Step 2: Unscrew the Metal Door Frame
Our frame had six screws and they were easy to remove. (Please excuse the poor quality photo–it is a screenshot from my Instagram reel! But wanted to show you a visual.)
Step 3: Remove the Metal Door Frame
Use a utility knife to cut the silicone caulk lining the door frame. Tip: Be sure to cut parallel to the shower wall so that you do not scratch it.
Step 4: Clean Off the Remaining Silicone
Use a putty knife (or credit card) to scrape off the silicone caulk from the shower walls. Tip: Warm up the silicone with a hairdryer to make it easier to remove.
Step 5: Clean the Shower
This part is a little gross, but it will feel so good when it is finished! I will spare you the visual, but if you want to see a before and after check out my reel.
Step 6: Add the Shower Curtain
Fill the screw holes in the shower insert with white silicone. Then, hang a pretty tension rod, rings, and shower curtain (and liner) and enjoy a completely new view.
Shower Before and After
Mind blown! I could not be happier with the results of this easy DIY! I used a gold tension rod, gold curtain rings, fabric shower liner, and plaid shower curtain. Linking some more pretty curtains options here:
Do you have this type of shower in your home? Or do you have other simple bathroom DIYs to share? I’ll be working on this space this year, as well as our guest bathroom, so stay tuned for more builder grade bathroom upgrades coming soon. XO,